Sustainability

Oregon and Colorado EPR: What the First Two Live Programmes Teach Brands

By Packfora Editorial Team 7 Minutes read November 19, 2026
Oregon and Colorado EPR: What the First Two Live Programmes Teach Brands

Quick Answer

Packaging EPR readiness is the work of getting component-level packaging data, producer definitions and a reporting process in place before a state's reporting and fee dates arrive. Oregon and Colorado, the first two US states with live packaging programmes, show that the deadline is rarely the hard part. The data, the ownership and the repeatable process behind it decide how smoothly a brand gets through each cycle.

Two US states have now run packaging EPR long enough to show what it asks of a brand. Oregon set fees from July 2025. Colorado followed in January 2026. Neither is a forecast: reporting dates have passed, fees are running and, in Oregon, a federal court has ruled on the law itself.

That makes them the best preview available for brands facing California, Washington, Maryland and Minnesota next. This post sets out six lessons from the first two programmes, drawn from Packfora's US packaging team and checked against current programme sources.

The short version: build the data first. Everything else gets easier.

What do Oregon and Colorado show about packaging EPR in practice?

Both states use the same producer responsibility organisation, Circular Action Alliance (CAA), to collect reports and fees on behalf of producers. The table shows where the two programmes stand.

  Oregon Colorado
Law Plastic Pollution and Recycling Modernization Act (SB 582) HB 22-1355
Programme operator Circular Action Alliance Circular Action Alliance (packaging and paper)
Fees Active from July 2025 Active from January 2026
Annual supply report Report for 2025 due 31 May 2026 Report for 2025 due 31 May 2026
2027 invoicing CAA expects to issue its next invoices in January 2027 Dues invoiced in January and July, each itemised by material category
Small producers Optional flat fee for producers supplying 10 tons or less of covered material Optional flat dues for producers supplying 10 tons or less of covered material
Legal status Upheld by a federal district court on 27 August 2026. The challenger has appealed and asked for enforcement to be paused for its members. No ruling on that request reported as of mid-November. Challenged in a state-court suit and a federal suit. Neither court has granted an injunction, so the programme remains in effect.

Legal and fee status in this post is current as of 18 November 2026.

Two rows matter most for planning. Registration is not optional, and Oregon publishes the names of producers it finds non-compliant. And the reporting date was the same in both states, which means one calendar has to cover rules that are not the same.

What are the six lessons from Oregon and Colorado?

Packfora's US team boils the early-state experience down to six lessons. The table gives the short version, and the sections that follow take each in turn.

Lesson What it means in practice First step
1. Build the data foundation early Component-level weights, materials and sales volumes exist before the reporting date One record per SKU, linked to its components
2. Standardise nationally, customise by state One core data and process model, with each state's definitions, exemptions and dates layered on top Map each state's differences against the core model
3. Define producer responsibility upfront The obligated producer, covered packaging and exemptions are confirmed for each state and legal entity List every legal entity and test it against each state
4. Treat EPR as an ongoing process Registration, reporting, fees and updates repeat every cycle Put the full cycle in a shared calendar
5. Engage cross-functionally Packaging, regulatory, sustainability, finance, procurement and IT or data each own an input Name one owner for the whole cycle
6. Plan for evolving requirements Reporting rules, fees and programme details keep changing after launch Assign someone to watch for changes

Why does the data foundation decide how EPR goes?

The first lesson is the least glamorous. Reporting asks for packaging by component: material, weight and sales volume, and in some cases recyclability and recycled content. A brand that keeps this in artwork files, supplier emails and three different spreadsheets spends the weeks before a deadline reconciling them.

The fix starts earlier and costs less. One record per SKU, linked to its components, with material and weight captured once and owned by a named person. That is what packaging specification data is for. Brands that already hold clean specifications have far less to rebuild when a state asks for numbers.

The invoices make the point. Colorado itemises each 2027 invoice by material category, so any error in how a component was classified shows up as a line on the bill.

How do you standardise nationally and still meet each state's rules?

CAA is the named programme operator in Oregon, Colorado, California, Minnesota, Maryland and Washington. That makes one core data model reusable across six states. It does not make the states identical. The definitions of a producer, covered material and exemption vary, and each applies at the level of the legal entity.

Insight

One operator across six states means the data model travels. The producer definition does not travel, so it has to be checked state by state.

Take small producers. Oregon and Colorado both offer an optional flat fee to producers supplying 10 tons or less of covered material, and each state has its own exemption rules on top. A brand with three legal entities can be an obligated producer in one state through one entity and exempt through another. Settle that in writing for each state and each entity before reporting starts. Our state-by-state EPR overview covers the wider multi-state picture.

Who needs to be in the room, and for how long?

EPR runs as a cycle: registration, reporting, fees, updates, then reporting again. Treat it as a one-off project and the second year costs as much as the first. Both states ask for annual supply reports, so the process needs named owners and a calendar.

The inputs sit in different departments. Packaging holds specifications. Regulatory holds producer status. Finance pays the invoices. Procurement holds the supplier relationships that produce material data, so supplier data requests belong in the sourcing process from the start. IT or data teams hold the systems everyone depends on.

What changes after a programme launches?

A good deal. Rules that looked settled at launch have moved in both states. Oregon's law faced a constitutional challenge from the National Association of Wholesaler-Distributors (NAW). On 27 August 2026 a federal district court ruled for the state on the remaining claims after a trial. NAW appealed to the Ninth Circuit on 24 September, and on 16 October it asked the district court to pause enforcement for its members while the appeal runs. No ruling on that request had been reported by mid-November. NAW's opening brief in the appeal is due on 17 December.

The same group has sued over Colorado's law, where a separate state-court case is also pending, and over California's, alongside 17 states. In Colorado, neither court has granted an injunction. The practical effect: CAA invoices go out in January 2027 whatever happens in court, and the pause request would cover NAW members only.

Maine shows how a timeline can move before a programme starts. The state's call for a stewardship organisation drew no responses in August, with CAA declining to apply. Maine's environment department said in September that it plans to revise the request and try again, and it will set new dates only once an organisation is chosen. Producers there do not have to register, report or pay yet.

Fee design keeps developing too. Colorado's 2027 dues schedule adjusts base dues through eco-modulation factors, and Oregon's fee schedule includes bonuses tied to life cycle evaluation results, so documenting a pack's impact can lower what a brand pays. Our post on how eco-modulation affects fees explains the mechanism, and our work on design-led packaging cost reduction shows how brands act on it.

The practical reading is to build flexibility in. Keep the rules in a table the team can update, assign someone to watch for changes, and avoid hard-wiring any one state's definitions into the data model.

What should brands do before the next states go live?

Start with the data, because it is the only step that shortens everything after it. Then confirm which legal entities are obligated producers in each state, and register where required. Put a calendar in place that tracks each state's reporting dates, and agree who owns it.

Collect sales volumes by state as well, including e-commerce shipments into each state. A national total will not satisfy a state report.

California is next. CAA published its 2027 California fee schedule on 1 October 2026. Rates are preliminary until the state approves the programme plan. Producers are invoiced in January, in full or in two halves, with a separate January invoice for the Plastic Pollution Mitigation Fund portion. SB 54's first source-reduction target, 10% for single-use plastic, also falls on 1 January 2027. Washington, Maryland and Minnesota are building their programmes behind it.

If your packaging data lives in too many places to report from, Packfora's sustainable packaging and compliance consulting team can help you build the baseline before the next state asks for it.

Frequently Asked Questions

What is packaging EPR in Oregon and Colorado?

Packaging EPR in Oregon and Colorado is a system that makes producers pay for the recycling of the packaging they put on the market. Producers register with the programme operator, Circular Action Alliance, report packaging by material and weight, and pay fees that fund recycling services. Oregon's fees started in July 2025 and Colorado's in January 2026.

Who runs the Oregon and Colorado packaging EPR programmes?

Circular Action Alliance (CAA), a producer responsibility organisation, runs the packaging programmes in both Oregon and Colorado, under state agency oversight. CAA is also the named operator in California, Minnesota, Maryland and Washington, so a brand's reporting data can be reused across those states even though each state's definitions differ.

Is Oregon's packaging EPR law still in force after the court challenge?

Oregon's packaging EPR law remains in force. A federal district court upheld it on 27 August 2026, and the trade group that challenged it has appealed to the Ninth Circuit. It has also asked the district court to pause enforcement for its members. No ruling on that request had been reported by mid-November 2026, so brands should keep complying and watch for developments.

What should brands prepare before new state EPR programmes start?

Brands should prepare component-level packaging data for every SKU, confirm which legal entities count as obligated producers in each state, assign internal ownership and build a reporting calendar. Data comes first, because Oregon and Colorado show that reporting and fee calculations depend on it more than on any single deadline.

Sources